歡迎來到Linux教程網
Linux教程網
Linux教程網
Linux教程網
Linux教程網 >> Linux基礎 >> 關於Linux >> RedHat配置yum 從centos5源與光盤源更新軟件

RedHat配置yum 從centos5源與光盤源更新軟件

日期:2017/3/2 10:02:58   编辑:關於Linux

YUM顧名思義,Yellow Dog Updater,Modified.Yum為基於RPM系統做了相同的工作。它提供了一個簡單的命令,可用於在首先安裝和更新任何其他必要的軟件包以滿足所需的軟件包依賴關系之後,自動化安裝或更新一個軟件包,類似Debian下apt-get的工具.

YUM的特點:
可以同時配置多個資源庫(Repository)
簡潔的配置文件(/etc/yum.conf
自動解決增加或刪除rpm包時遇到的倚賴性問題
使用方便
保持與RPM數據庫的一致性

RHEL AS5可以通過Yum升級系統的功能,但默認rhel-debuginfo.repo 的設置是從RedHat的Yum源來升級系統,如果您沒有購買Redhat的服務,Redhat5後面版本升級是收費,需要key才能升級,那麼使用Yum是無法升級的。幸運的是,由於centos是免費的企業版本,可以借用centos yum源更新RHEL AS5系統.

配置YUM 從centos5源更新軟件

[root@clinet ~]# rpm –import http://ftp.twaren.net/Linux/CentOS/RPM-GPG-KEY-CentOS-5
安裝那個ftp.twaren.net的GPG,也可增加其他資源庫,自己選擇一個離自己地理位置近點
[root@clinet ~]# rpm -qa gpg-pubkey*
檢查GPG Key
gpg-pubkey-e8562897-459f07a4
如果要刪除Key,使用以下命令
[root@clinet ~]# rpm -e gpg-pubkey-e8562897-459f07a4

[root@clinet ~]# vi /etc/yum.repos.d/rhel-debuginfo.repo
[rhel-debuginfo]
name=Red Hat Enterprise Linux $releasever – $basearch – Debug
baseurl=ftp://ftp.redhat.com/pub/redhat/linux/enterprise/$releasever/en/os/$basearch/Debuginfo/
baseurl是你的YUM源地址
enabled=0
是否啟用這個倉庫,1為起用,0為禁用
gpgcheck=1
設置gpgcheck=1會讓yum檢查每個下載的RPM的GnuPG簽名。這麼做是因為你需要適當的GnuPG key注冊到您的RPM數據庫。可以防止被欺騙,如:非法入侵發行版網站,木馬導入軟件包,使不知情用戶下載
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
GPGKEY 的存放地址

以上默認有的,復制添加以下更新點插入到rhel-debuginfo.repo文本裡後面
[base]
name=Red Hat Enterprise Linux $releasever -Base
baseurl=http://ftp.twaren.net/Linux/CentOS/5/os/$basearch/
gpgcheck=1
[update]
name=Red Hat Enterprise Linux $releasever -Updates
baseurl=http://ftp.twaren.net/Linux/CentOS/5/updates/$basearch/
gpgcheck=1
[extras]
name=Red Hat Enterprise Linux $releasever -Extras
baseurl=http://ftp.twaren.net/Linux/CentOS/5/extras/$basearch/
gpgcheck=1
[addons]
name=Red Hat Enterprise Linux $releasever -Addons
baseurl=http://ftp.twaren.net/Linux/CentOS/5/addons/$basearch/
gpgcheck=1
[root@clinet ~]#yum clean all 清除緩存及舊的包
[root@clinet ~]# yum install httpd 測試是否能更新軟件

注意:當第一次使用yum或yum資源庫有更新時,yum會自動下載所有所需的headers放置於/var/cache/yum目錄下,所需時間可能較長.請耐心等待,所以後面會顯示一連串數據.
配置YUM 從本地光盤更新軟件
[root@clinet ~]# mkdir /mnt/cdrom
創建掛載點
[root@clinet ~]# mount /dev/cdrom /mnt/cdrom
掛載光盤
mount: block device /dev/cdrom is write-protected, mounting read-only

[root@clinet /]# ll /etc/yum.repos.d/
total 4
-rw-r–r– 1 root root 781 Feb 24 03:19 rhel-debuginfo.repo
[root@clinet /]# cd /etc/yum.repos.d/
[root@clinet yum.repos.d]# cp rhel-debuginfo.repo rhel-debuginfo.repo.bak
拷貝為rhel-debuginfo.repo.bak做備份
[root@clinet yum.repos.d]# ll
total 8
-rw-r–r– 1 root root 781 Feb 24 03:19 rhel-debuginfo.repo
-rw-r–r– 1 root root 781 Feb 25 00:34 rhel-debuginfo.repo.bak
[root@clinet yum.repos.d]# vi rhel-debuginfo.repo
編輯rhel-debuginfo.repo,插入以下代碼

[rhel-debuginfo]
name=Red Hat Enterprise Linux $releasever – $basearch – Debug
baseurl=file:///mnt/cdrom/Server
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

Copyright © Linux教程網 All Rights Reserved