RHEL/CentOS 5.x使用第三方軟件庫（EPEL與RPMForge、RPMFusion軟件庫）。
在CentOS下運行yum install flash-plugin或yum install mplayer的時候，提示庫裡沒有找到這個軟件？為什麼會這樣？因為CentOS是RHEL編譯過來的，去掉了所有關於版權問題的東西。因此，在沒有使用第三方軟件庫的情況下，很多軟件無法用yum install來直接安裝。
EPEL(Extra Packages for Enterprise Linux )軟件庫提供為 EL4 及 EL5 重新編譯的 Fedora 組件。這個軟件庫在不替換系統組件方面下了功夫。在某些情況下它嘗試直接針對 CentOS 兼容性的問題，但堅決否定軟件庫間的兼容性是目標之一。當它與其它第三方軟件庫混合使用時，問題可能會出現。故此，當你使用 EPEL 時，尤其是當你亦會運用其它件庫的組件時，請確保你使用 yum 的 Priorities 插件。
RPMForge庫現在已經擁有超過10000種的CentOS的軟件包，被CentOS社區認為是最安全也是最穩定的一個第三方軟件庫。
下面，偶就來講解下如何使用EPEL與RPMForge、RPMFusion軟件倉庫：
一、安裝yum-priorities插件。
這個插件是用來設置yum在調用軟件源時的順序的。因為官方提供的軟件源，都是比較穩定和被推薦使用的。因此，官方源的順序要高於第三方源的順序。如何保證這個順序，就需要安裝yum-priorities這插件了。
[root@CentOS ~]# yum install yum-priorities #安裝yum-priorities
安裝完後需要設置/etc/yum.repos.d/ 目錄下的.repo相關文件（如CentOS-Base.repo），在這些文件中插入順序指令：priority=N （N為1到99的正整數，數值越小越優先）
一般的配置是這樣的：
[base], [addons], [updates], [extras] … priority=1
[CentOSplus],[contrib] … priority=2
其他第三的軟件源為：priority=N （推薦N>10）
如我的CentOS-Base.repo配置為：
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#[base]
name=CentOS-$releasever – Base
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1#released updates
[updates]
name=CentOS-$releasever – Updates
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever – Addons
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=addons
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/addons/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1#additional packages that may be useful
[extras]
name=CentOS-$releasever – Extras
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1#additional packages that extend functionality of existing packages
[CentOSplus]
name=CentOS-$releasever – Plus
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=CentOSplus
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/CentOSplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=2#contrib – packages by CentOS Users
[contrib]
name=CentOS-$releasever – Contrib
mirrorlist=http://mirrorlist.CentOS.org/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.CentOS.org/CentOS/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=2
二、下載與安裝相應EPEL的rpm文件包
1，下載與安裝EPEL的rpm文件包
32位系統
[root@CentOS ~]# rpm -ivh http://download.fedora.RedHat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm
64位系統
[root@CentOS ~]# rpm -ivh http://download.fedora.redhat.com/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
如果您不清楚您的系統內核，請使用 uname -a 命令來查看您的內核信息。
2，導入DAG的PGP Key
[root@CentOS ~]# rpm –import /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL
3，設置/etc/yum.repos.d/epel.repo文件中源的級別，就是添加priority=11這句。
如我的epel.repo文件內容：
[epel]
name=Extra Packages for Enterprise Linux 5 – $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/5/$basearch
mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-5&arch=$basearch
failovermethod=priority
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL
priority=11[epel-debuginfo]
name=Extra Packages for Enterprise Linux 5 – $basearch – Debug
#baseurl=http://download.fedoraproject.org/pub/epel/5/$basearch/debug
mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-debug-5&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL
gpgcheck=1[epel-source]
name=Extra Packages for Enterprise Linux 5 – $basearch – Source
#baseurl=http://download.fedoraproject.org/pub/epel/5/SRPMS
mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=epel-source-5&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL
gpgcheck=1
