歡迎來到Linux教程網
Linux教程網
Linux教程網
Linux教程網
Linux教程網 >> Linux綜合 >> 學習Linux >> CentOS 7 命令行鏈接wifi

CentOS 7 命令行鏈接wifi

日期:2017/3/3 17:48:41   编辑:學習Linux

CentOS 7 命令行鏈接wifi

CentOS 7 命令行鏈接wifi


之前把自己電腦弄成雙系統了,加了個centos7 服務器端。現在放假回家連不上家裡的網絡,各種著急啊。。

經過一番調查終於連上了,留個筆記以備後用,哈哈。

1、首先,切換到超級管理用戶
[user@localhost]$su root

2、檢查當前可用的網卡,紅色標記的就是網卡,這個並不是都是相同的
[root@localhost]$iw dev
phy#0
Interface wlp2s0
ifindex 3
wdev 0x1
addr a4:db:30:84:4b:1c
type managed
以上是未連接網絡的打印信息,如果已經連上則如下:
[root@localhost]#iw dev
phy#0
Interface wlp2s0
ifindex 3
wdev 0x1
addr a4:db:30:84:4b:1c
ssid liylr
type managed
channel 11 (2462 MHz), width: 40 MHz, center1: 2452 MHz
ssid就是廣播信道名稱,也就是你的無線網絡信號,廣播信道就是最後一個

3、查看連接前的初始狀態
[root@ localhost]#ifconfig wlp2s0
wlp2s0: flags=4098 < BROADCAST,MULTICAST> mtu 1500
ether 60:d8:19:cc:74:84 txqueuelen 1000 (Ethernet)
RX packets 13547 bytes 13381624 (12.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12659 bytes 1974514 (1.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

4、測試是否已經鏈接網絡
[root@ localhost]#iw wlp2s0 link
Not connected.

5、獲取SSID
[root@ localhost]#iw wlp2s0 scan | grep SSID
command failed: Network is down (-100)
無線網絡未激活,先激活。
[root@ localhost]#ifconfig wlp2s0 up
[root@ localhost]#ifconfig wlp2s0
wlp2s0: flags=4099 < UP,BROADCAST,MULTICAST> mtu 1500
ether 60:d8:19:cc:74:84 txqueuelen 1000 (Ethernet)
RX packets 13547 bytes 13381624 (12.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12659 bytes 1974514 (1.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
6、查看所有可用的無線網絡信號
[root@localhost]#iw wlp2s0 scan | grep SSID
SSID: USER-20150101NS_Network_2
SSID: Tenda_17BEF8
SSID: PC-20140723DBVC_Network_1
SSID: 123
SSID: Tenda_0A6410
SSID: xiaohui
SSID: Tenda_51E4F0
SSID: Nobody Can
SSID: TP-LINK_3C479

7、連接無線網
[root@localhost]#wpa_supplicant -B -i wlp2s0 -c <(wpa_passphrase "Tenda_17BEF8" "useradmin")
Successfully initialized wpa_supplicant

Tenda_17BEF8是你想鏈接的SSID,useradmin為鏈接密碼。

8、分配IP地址(通過dhclient控制網卡進行網絡操作獲取IP)
[root@localhost]#dhclient wlp2s0

9、最後,查看無線網卡地址信息,有ip地址表示網絡連接成功了
[root@ localhost]#ifconfig wlp2s0
wlp2s0: flags=4163< UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.168.139 netmask 255.255.255.0 broadcast 192.168.168.255
inet6 fe80::62d8:19ff:fecc:7484 prefixlen 64 scopeid 0x20
ether 60:d8:19:cc:74:84 txqueuelen 1000 (Ethernet)
RX packets 13567 bytes 13386147 (12.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12682 bytes 1979923 (1.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

http://xxxxxx/Linuxjc/1184662.html TechArticle

Copyright © Linux教程網 All Rights Reserved