Make ADB To Support Android Devices（如何使ADB在Linux下支持Android設備的udev規則配置）
/***********************************************************
* Author : Samson
* Date : 02/26/2014
* Test platform:
* Linux Ubuntu 3.2.0-58-generic-pae
* GNU bash, version 4.2.39
* **********************************************************/
1.Connect Andriod device to your Linux ***.
2.Use "lsusb".
Use lsusb to check the Android device ID in usb subsystem, like below (do not care "$"):
$ lsusb
Bus 001 Device 002: ID 0fce:6156 Sony Ericsson Mobile
Number "0fce" is the Andriod device ID in use subsystem.
3.Update adb tool.
Turn to Android sdk folder "tools", typein below words:
$./android adb update
it's neccesary step to create ~/.android/adb_usb.ini.
4. Edit adb_usb.ini .
Edit ~/.android/adb_usb.ini. Add usb subsystem ID to adb_usb.ini, like below:
0x0fec
5.Create udev rule file.
Create a new file named "sony-android.rules" in /etc/udev/rules.d folder.
Add below content to "sony-android.rules"
SUBSYSTEM=="usb", SYSFS{idVendor}=="0fec", MODE="0666"
idVendor USB Vendor IDs, reference: http://developer.android.com/tools/device.html
chmod rule file:
sudo chmod a+rx /etc/udev/rules.d/sony-android.rules
6.Restart udev service.
Do as below to restart udev service:
$ sudo service udev restart
7.Restart adb service.
Do as below to restart adb service.
$ adb kill-server
$ adb start-server
8.Try "adb devices".
Plug out Adnroid device, then, Plug in again, use "adb devices" to check your Andriod device.
更多Android相關信息見Android 專題頁面 http://www.linuxidc.com/topicnews.aspx?tid=11
