#1：找出無線網卡類型信息
$
lspci
$
lspci | grep -i wireless
$
lspci | egrep -i --color 'wifi|wlan|wireless'
#2：找出無線網卡驅動信息
$
lspci -vv -s 0c:00.0
例子：
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Device 1121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: iwlwifi
#3：配置無線網絡接口
iwconfig 網卡名
//iwconfig和ifconfig命令類似，但是這個命令是無線網卡專用的命令
例子：
wlan0 IEEE 802.11abgn ESSID:"nixcraft5g" Mode:Managed Frequency:5.18 GHz Access Point: 74:44:44:44:57:FC Bit Rate=6 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off Link Quality=41/70 Signal level=-69 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:28 Missed beacon:0
#
iwconfig wlan0 | grep -i --color quality //查詢網絡連接質量
#
iwconfig wlan0 | grep -i --color signal //查詢信號強度
#4：動態顯示連接強度
#
watch -n 1 cat /proc/net/wireless
