操作環境：
[root@linuxidc ~]# uname -a
Linux linuxidc 2.6.32-358.18.1.el6.x86_64#1 SMP Wed Aug 28 17:19:38 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
現狀分析：
系統有兩個硬盤，第一個硬盤107G,“/”分區空間當時分區時只給了7.7G過小，空間馬上占完。現在系統有第二個硬盤sdb大小為16GB，希望把sdb的所有空間加入到“/”分區中，是其空間容量從7.7GB變成7.7GB+16GB（約2.4GB）。（當然如果這裡只有一個硬盤sda,有很多空間尚未使用可以進行同樣的操作）
操作步驟如下：
第一步、查看本機現有分區情況
[root@linuxidc ~]# df -h
文件系統容量已用可用已用%% 掛載點
/dev/mapper/VolGroup-lv_root
7.7G 7.1G 155M 98% /
tmpfs 3.9G 296K 3.9G 1% /dev/shm
/dev/sda1 485M 64M 396M 14% /boot
/dev/sda3 83G 350M 79G 1% /media
第二步、查看本機的磁盤情況
[root@linuxidc ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
注意：此時還沒有在EXSI5.0中添加第二塊硬盤
[root@linuxidc ~]#
第三步、添加第二塊硬盤
查看此時系統磁盤情況
root@linuxidc ~]# fdisk -l
Disk /dev/sda: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x000dc0ad
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinderboundary.
/dev/sda2 64 2089 16264192 8e Linux LVM
/dev/sda3 2090 13054 88076362+ 83 Linux
Disk /dev/sdb: 17.2 GB, 17179869184 bytes
255 heads, 63 sectors/track, 2088 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_root: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 8325 MB,8325693440 bytes
255 heads, 63 sectors/track, 1012 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x00000000
可以看到我們新添加的硬盤sdb
[root@linuxidc ~]#
第四步、對第二塊硬盤sdb進行分區
[root@linuxidc ~]# fdisk /dev/sdb
Device contains neither a valid DOSpartition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with diskidentifier 0xfa4abbdc.
Changes will remain in memory only, untilyou decide to write them.
After that, of course, the previous contentwon't be recoverable.
Warning: invalid flag 0x0000 of partitiontable 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated.It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibilityflag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOSpartition table
p print the partition table
q quit without saving changes
s create a new empty Sundisklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (expertsonly)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 4
First cylinder (1-2088, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G}(1-2088, default 2088):
Using default value 2088
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
說明：上面操作對sdb硬盤進行了分區操作，設為sdb4分區了（當然上面建立的主分區可以為1-4中的任意一個，我這裡選擇的4）。
第五步、對新建立的sdb4分區進行格式
[root@linuxidc ~]# mkfs.ext4 /dev/sdb4
mke2fs 1.41.12 (17-May-2010)
文件系統標簽=
操作系統:Linux
塊大小=4096 (log=2)
分塊大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1048576 inodes, 4192957 blocks
209647 blocks (5.00%) reserved for thesuper user
第一個數據塊=0
Maximum filesystem blocks=4294967296
128 block groups
32768 blocks per group, 32768 fragments pergroup
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
正在寫入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystemaccounting information: done完成
This filesystem will be automaticallychecked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
說明：將sdb4分區格式化為ext4格式，因為CentOS安裝是系統的格式ext4，所以這裡要注意一下。
第六步、格式後的sdb4分區添加為物理卷
[root@linuxidc ~]# pvcreate /dev/sdb4
Physical volume "/dev/sdb4" successfully created
更多詳情見請繼續閱讀下一頁的精彩內容： http://www.linuxidc.com/Linux/2013-12/93431p2.htm
