或許是我見得少，反正這是目前遇到最好命令行參數例子，下面給出源碼及簡單介紹：
第一部分：主要是聲明一個結構體，將解析到的參數放在結構體中，同時還給出一個默認參數；
16 #include <getopt.h>
61 typedef struct Args {
62 VideoStd_Type videoStd;
63 Char *videoStdString;
64 Sound_Input soundInput;
65 Capture_Input videoInput;
66 Char *speechFile;
67 Char *videoFile;
68 Codec *speechEncoder;
69 Codec *videoEncoder;
70 Int32 imageWidth;
71 Int32 imageHeight;
72 Int videoBitRate;
73 Int keyboard;
74 Int time;
75 Int osd;
76 Int interface;
77 } Args;
78
79 #define DEFAULT_ARGS \
80 { VideoStd_D1_NTSC, "D1 NTSC", Sound_Input_MIC, Capture_Input_COMPOSITE, \
81 NULL, NULL, NULL, NULL, 0, 0, -1, FALSE, FOREVER, FALSE, FALSE }
第二部分：核心部分，標准的信息打印，和命令行參數解析函數
118 /******************************************************************************
119 * usage
120 ******************************************************************************/
121 static void usage(void)
122 {
123 fprintf(stderr, "Usage: encode [options]\n\n"
124 "Options:\n"
125 "-s | --speechfile Speech file to record to\n"
126 "-v | --videofile Video file to record to\n"
127 "-y | --display_standard Video standard to use for display (see below).\n"
128 "-r | --resolution Video resolution ('width'x'height')\n"
129 " [video standard default]\n"
130 "-b | --videobitrate Bit rate to encode video at [variable]\n"
131 "-x | --svideo Use s-video instead of composite video \n"
132 " input [off]\n"
133 "-l | --linein Use linein for encoding sound instead of mic \n"
134 " [off]\n"
135 "-k | --keyboard Enable keyboard interface [off]\n"
136 "-t | --time Number of seconds to run the demo [infinite]\n"
137 "-o | --osd Show demo data on an OSD [off]\n"
138 "-i | --interface Launch the demo interface when exiting [off]\n"
139 "-h | --help Print this message\n\n"
140 "Video standards available:\n"
141 "\t1\tD1 @ 30 fps (NTSC) [Default]\n"
142 "\t2\tD1 @ 25 fps (PAL)\n"
143 "\t3\t720P @ 60 fps\n"
144 "\t4\t720P @ 50 fps\n"
145 "\t5\t1080I @ 30 fps [Not supported for DM365]\n"
146 "\t6\t1080I @ 25 fps [Not supported for DM365]\n"
147 "You must supply at least a video or a speech file or both\n"
148 "with appropriate extensions for the file formats.\n\n");
149 }
150
核心部分：參數解析的時候分短選項和長選項，那麼shortOptions與longOptions就對應與兩者，
其中shortOptions選項中如果加了“：”冒號，那麼就需要帶參數，而longOptions中通過“ required_argument”
與“ no_argument“來進行區分，最後把這兩個參數傳遞給getopt_long函數就能逐一返回一個個選項，再根據選項
得到對應的參數，並將其存放在結構體中，整個過程就這樣了；
151 /******************************************************************************
152 * parseArgs
153 ******************************************************************************/
154 static Void parseArgs(Int argc, Char *argv[], Args *argsp)
155 {
156 const Char shortOptions[] = "s:v:y:r:b:xlkt:oih";
157 const struct option longOptions[] = {
158 {"speechfile", required_argument, NULL, 's'},
159 {"videofile", required_argument, NULL, 'v'},
160 {"display_standard", required_argument, NULL, 'y'},
161 {"resolution", required_argument, NULL, 'r'},
162 {"videobitrate", required_argument, NULL, 'b'},
163 {"svideo", no_argument, NULL, 'x'},
164 {"linein", no_argument, NULL, 'l'},
165 {"keyboard", no_argument, NULL, 'k'},
166 {"time", required_argument, NULL, 't'},
167 {"osd", no_argument, NULL, 'o'},
168 {"interface", no_argument, NULL, 'i'},
169 {"help", no_argument, NULL, 'h'},
170 {0, 0, 0, 0}
171 };
172
173 Int index;
174 Int c;
175 Char *extension;
176
177 for (;;) {
178 c = getopt_long(argc, argv, shortOptions, longOptions, &index);
179
180 if (c == -1) {
181 break;
182 }
183
184 switch (c) {
185 case 0:
186 break;
187
188 case 's':
189 extension = rindex(optarg, '.');
190 if (extension == NULL) {
191 fprintf(stderr, "Speech file without extension: %s\n",
192 optarg);
193 exit(EXIT_FAILURE);
194 }
195
196 argsp->speechEncoder =
197 getCodec(extension, engine->speechEncoders);
198
199 if (!argsp->speechEncoder) {
200 fprintf(stderr, "Unknown speech file extension: %s\n",
201 extension);
202 exit(EXIT_FAILURE);
203 }
204 argsp->speechFile = optarg;
205
206 break;
....
305 case 't':
306 argsp->time = atoi(optarg);
307 break;
308
309 case 'o':
310 argsp->osd = TRUE;
311 break;
312
313 case 'i':
314 argsp->interface = TRUE;
315 break;
316
317 case 'h':
318 usage();
319 exit(EXIT_SUCCESS);
320
321 default:
322 usage();
323 exit(EXIT_FAILURE);
324 }
325 }
326
327 if (argsp->videoInput != Capture_Input_SVIDEO) {
328 if (argsp->videoStd == VideoStd_D1_NTSC || argsp->videoStd == VideoStd_D1_PAL ) {
329 argsp->videoInput = Capture_Input_COMPOSITE;
330 } else {
331 argsp->videoInput = Capture_Input_COMPONENT;
332 }
333 }
334
335 /* Need at least one file to decode and only one sound file */
336 if (!argsp->videoFile && !argsp->speechFile) {
337 usage();
338 exit(EXIT_FAILURE);
339 }
340 }
第三部分：主函數調用部分
388 /******************************************************************************
389 * main
390 ******************************************************************************/
391 Int main(Int argc, Char *argv[])
392 {
393 Args args = DEFAULT_ARGS;
426 /* Parse the arguments given to the app and set the app environment */
427 parseArgs(argc, argv, &args);
428 }
注意：頭文件為 #include <getopt.h>，man 到的信息如下：
www.linuxidc.com@www.linuxidc.com:~/abs_guide/chapter3$ man -k getopt_long
getopt_long (3) - Parse command-line options
getopt_long_only (3) - Parse command-line options
