歡迎來到Linux教程網
Linux教程網
Linux教程網
Linux教程網
Linux教程網 >> Linux基礎 >> Linux教程 >> Linux下如何用fdisk新建分區

Linux下如何用fdisk新建分區

日期:2017/2/28 14:51:35   编辑:Linux教程
fdisk磁盤分區工具

1.首先查看硬盤信息

fdisk -l 如果有硬盤有剩余空間就可以對其進行分區


[root@bogon 桌面]# fdisk -l

Disk /dev/sda: 85.9 GB, 85899345920 bytes
255 heads, 63 sectors/track, 10443 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000471ad

Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 204800 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 26 3851 30720000 83 Linux
/dev/sda3 3851 4106 2048000 82 Linux swap / Solaris
/dev/sda4 4106 10444 50912256 5 Extended
/dev/sda5 4106 10444 50911232 83 Linux

Disk /dev/sdb: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
#從上面看出/dev/sda空間已經用完了,/dev/sdb沒有使用。

下面我們對/dev/sdb 進行分區

[root@bogon 桌面]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xfaa2aa49.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').

Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
fdisk選中/dev/sdb 輸入m所有基本選項都出現,輸入n新建分區

Command (m for help): n
Command action
e extended
p primary partition (1-4)
Copyright © Linux教程網 All Rights Reserved