一、檢測硬盤能否被識別
# fdisk -l
Disk /dev/sda: 36.7 GB, 36703934464 bytes
255 heads, 63 sectors/track, 4462 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 261 2096451 83 Linux
/dev/sda2 262 783 4192965 83 Linux
/dev/sda3 784 1305 4192965 83 Linux
/dev/sda4 1306 4462 25358602+ 5 Extended
/dev/sda5 1306 1827 4192933+ 83 Linux
/dev/sda6 1828 2088 2096451 82 Linux swap
/dev/sda7 2089 4462 19069123+ 83 Linux
Disk /dev/sdb: 36.7 GB, 36748945408 bytes
255 heads, 63 sectors/track, 4467 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 509 4088511 83 Linux
/dev/sdb2 510 2430 15430432+ 83 Linux
/dev/sdb3 2431 2557 1020127+ 82 Linux swap
/dev/sdb4 2558 4467 15342075 f W95 Ext'd (LBA)
/dev/sdb5 2558 2811 2040223+ 83 Linux
/dev/sdb6 2812 3830 8185086 83 Linux
/dev/sdb7 3831 4467 5116671 83 Linux
/dev/sdb說明已經識別出第二塊硬盤
二、掛載硬盤
1、在本地硬盤中臨時創建一個目錄
#mkdir /opt/data/tmp1
2、掛載第二塊硬盤中的一個分區/dev/sdb1到tmp1
#mount /dev/sdb1 /opt/data/tmp1
3、查看是否被掛載
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 2.0G 141M 1.8G 8% /
none 1014M 0 1014M 0% /dev/shm
/dev/sda2 4.0G 1.8G 2.0G 47% /opt
/dev/sda7 18G 168M 17G 1% /opt/data
/dev/sda5 4.0G 1.4G 2.4G 37% /usr
/dev/sda3 4.0G 2.1G 1.8G 55% /var
/dev/sdb1 3.9G 1.4G 2.3G 38% /opt/tmp/tmp1
三、卸載硬盤
#umount /dev/sdb1
