1.install_software，修改“usr -name libX11.a”為"usr -name libX11.so"，一個是靜態共享庫，一個是動態共享庫。
GAMIT 10.35文件下載在Linux公社5 號FTP服務器
Linux公社(LinuxIDC.com) 5 號FTP服務器【關於GAMIT】資源浏覽查詢：
IP地址 ftp://www.linuxidc.com
端口 21
用戶 ftp5.linuxidc.com
密碼 www.linuxidc.com
具體下載方法見http://www.linuxidc.net/thread-1186-1-1.html 與 http://www.linuxidc.net/thread-1189-1-1.html
相關文章見 http://www.linuxidc.com/GAMIT/
2.makefile.config，修改：
# X11 library location - uncomment the appropriate one for your system
# Generic (will work on any system if links in place)
X11LIBPATH /usr/lib/X11
X11INCPATH /usr/include/X11
# Specific for Sun with OpenWindows
#X11LIBPATH /usr/openwin/lib
#X11INCPATH /usr/openwin/share/include/X11
# Specific for PC Solaris 10
#X11LIBPATH /usr/openwin/lib/
#X11INCPATH /usr/openwin/share/include/X11
# Specific to Linux RedHat 7,8 and 9, RH-FC1 -> 3
#X11LIBPATH /usr/X11R6/lib
#X11INCPATH /usr/X11R6/include/X11
# Specific to FC5
#X11LIBPATH /usr/lib
#X11INCPATH /usr/include/X11
# Specific for MIT HP and Sun for Release 5
#X11LIBPATH /usr/lib/X11R5
#X11INCPATH /usr/include/X11R5
# Specific for IBM AIX4.2
#X11LIBPATH /usr/lpp/X11/lib
#X11INCPATH /usr/lpp/X11/include
# Specific for MacOSX
#X11LIBPATH /usr/X11R6/lib
#X11INCPATH /usr/include/X11
為：
# X11 library location - uncomment the appropriate one for your system
# Generic (will work on any system if links in place)
#X11LIBPATH /usr/lib/X11
#X11INCPATH /usr/include/X11
# Specific for Sun with OpenWindows
#X11LIBPATH /usr/openwin/lib
#X11INCPATH /usr/openwin/share/include/X11
# Specific for PC Solaris 10
#X11LIBPATH /usr/openwin/lib/
#X11INCPATH /usr/openwin/share/include/X11
# Specific to Linux RedHat 7,8 and 9, RH-FC1 -> 3
#X11LIBPATH /usr/X11R6/lib
#X11INCPATH /usr/X11R6/include/X11
# Specific to FC5（F6,F7,F8 ）
X11LIBPATH /usr/lib
X11INCPATH /usr/include/X11
# Specific for MIT HP and Sun for Release 5
#X11LIBPATH /usr/lib/X11R5
#X11INCPATH /usr/include/X11R5
# Specific for IBM AIX4.2
#X11LIBPATH /usr/lpp/X11/lib
#X11INCPATH /usr/lpp/X11/include
# Specific for MacOSX
#X11LIBPATH /usr/X11R6/lib
#X11INCPATH /usr/include/X11
3，其他的地方根據自己需要修改。
4，最後修改登錄文件，添加環境變量等
